Containerized Uyuni Proxy Setup

Once container host for Uyuni Proxy containers is prepared, setup of containers require few additional steps to finish configuration.

  1. Generate Uyuni Proxy configuration archive file

  2. Transfer configuration archive to the container host prepared in installation step and extract it

  3. Start systemd proxy services

1. Create and generate Uyuni Proxy configuration

Configuration of Uyuni Proxy is generated by Uyuni Server and this configuration generation is required to be done for each containerized proxy. There are two ways how to generate Uyuni configuration: use web interface or spacecmd command.

Procedure: Generating Of Container Services Configuration using Web UI

  1. In the Web UI, navigate to Systems  Proxy Configuration and fill the required data:

  2. In the Proxy FQDN field type fully qualified domain name for the proxy.

  3. In the Parent FQDN field type fully qualified domain name for the Uyuni Server or another Uyuni Proxy.

  4. In the Proxy SSH port field type SSH port on which SSH service is listening on Uyuni Proxy. Recommended is to keep default 8022.

  5. In the Max Squid cache size [MB] field type maximal allowed size for Squid cache. Typically this should be at most 60% of available storage for the containers.

  6. In the SSL certificate choose if new server certificate should be generated for Uyuni Proxy or existing should be used.

    Depending on the choice then provide either path to signing CA certificate to generate new certificate or path to server certificate and its key to be used as proxy certificate.

  7. Click Generate to register new proxy FQDN in Uyuni Server and generate configuration archive with details for container host.

  8. After a few moments you are presented with file to download. Save this file locally.

suma proxy containerized webui
Procedure: Generating Of Container Services Configuration using spacecmd command

  1. In the console run following command:

    spacecmd proxy_container_config_generate_cert -- <proxy_fqdn> <oarent_fqdn> <squid_max_cache> <admin_email>

  2. Answer questions presented by script, namely Uyuni credentials and CA password.

    This will generate file config.zip with configuration for the Uyuni Proxy containers.

    For more information about spacecmd container proxy generation, see reference:spacecmd/proxy_container.adoc.

Irrespective of what method is used to generate Uyuni Proxy container configuration, new system entry will appear in system list. This new entry will be shown under previously entered Proxy FQDN value and will be of Foreign system type.

2. Transfer Uyuni Proxy configuration

Both spacecmdcommand and web UI ways generate configuration archive. This archive needs to be made available on container host.

Transfer this generated archive to the container host and extract it to configuration directory (by default /etc/uyuni/proxy).

3. Start Uyuni Proxy containers

Container can now be started by single systemctl command:

Listing 1. Procedure: Start Uyuni Proxy containers
systemctl start uyuni-proxy-pod
Listing 2. Procedure: Start Uyuni Proxy containers and make settings permanent
systemctl enable --now uyuni-proxy-pod

Check if all containers started up as expected by calling

podman ps

Five Uyuni Proxy containers should be present:

  • proxy-salt-broker

  • proxy-httpd

  • proxy-tftpd

  • proxy-squid

  • proxy-ssh

And should be part of proxy-pod container pod.